2014
de-la-Rubia-Cuestas, Ernesto
Universidad de Málaga, 2014.
@phdthesis{delaRubia2014,
title = {Interacción Natural Basada en un Conjunto Mínimo de Sensores Inerciales para Realidad Virtual sin Cables},
author = {Ernesto de-la-Rubia-Cuestas},
url = {http://riuma.uma.es/xmlui/handle/10630/8100},
year = {2014},
date = {2014-01-01},
address = {Supervisor: Antonio Díaz-Estrella},
school = {Universidad de Málaga},
keywords = {},
pubstate = {published},
tppubtype = {phdthesis}
}
Galdón-Conejo, Pedro M.
Universidad de Málaga, 2014.
@phdthesis{Galdon2014,
title = {Mejora en el interfaz de un dispositivo móvil para personas con discapacidad visual mediante el diseño de iconos hápticos},
author = {Pedro M. Galdón-Conejo},
url = {https://riuma.uma.es/xmlui/handle/10630/8153},
year = {2014},
date = {2014-01-01},
address = {Supervisor: Antonio Díaz-Estrella},
school = {Universidad de Málaga},
keywords = {},
pubstate = {published},
tppubtype = {phdthesis}
}
García-Berdonés, Carmen; Aguilera, Davinia Trujillo; Herrero-Reder, Ignacio
Uso De La Metodología Docente De Puzle Para Que Los Estudiantes Jueguen El Rol Del Profesorado Conference
Innovación educativa en las enseñanzas técnicas: Vol. II. (CUIEET 2014),, Universidad de Castilla la Mancha, 2014.
@conference{Car/Uso/2014,
title = {Uso De La Metodología Docente De Puzle Para Que Los Estudiantes Jueguen El Rol Del Profesorado},
author = {Carmen García-Berdonés and Davinia Trujillo Aguilera and Ignacio Herrero-Reder},
editor = {Mª Carmen Mata Montes},
url = {http://riuma.uma.es/xmlui/handle/10630/8157},
year = {2014},
date = {2014-01-01},
booktitle = {Innovación educativa en las enseñanzas técnicas: Vol. II. (CUIEET 2014),},
pages = {763–776},
publisher = {Universidad de Castilla la Mancha},
abstract = {Se describe una experiencia docente en la que se persigue que el alumnado empatice con el docente. Para ello se propone a los estudiantes realizar algunas de las tareas propias del profesor. Se usa la metodología de aprendizaje colaborativo, el puzle, con el objeto de desarrollar la competencia trabajo en grupo. Aunque en general los resultados son positivos, se discute que son sólo un primer paso para el correcto desarrollo de esta compleja competencia. Este trabajo se centra en el curso 2013-14, aunque la experiencia se viene desarrollando desde 2010 en diversas titulaciones de la Escuela Técnica Superior de Ingeniería de Telecomunicación de la Universidad de Málaga.},
keywords = {},
pubstate = {published},
tppubtype = {conference}
}
Se describe una experiencia docente en la que se persigue que el alumnado empatice con el docente. Para ello se propone a los estudiantes realizar algunas de las tareas propias del profesor. Se usa la metodología de aprendizaje colaborativo, el puzle, con el objeto de desarrollar la competencia trabajo en grupo. Aunque en general los resultados son positivos, se discute que son sólo un primer paso para el correcto desarrollo de esta compleja competencia. Este trabajo se centra en el curso 2013-14, aunque la experiencia se viene desarrollando desde 2010 en diversas titulaciones de la Escuela Técnica Superior de Ingeniería de Telecomunicación de la Universidad de Málaga.
Reyes-Lecuona, Arcadio; Molina-Tanco, Luis; Toledo, Daniel Gonzalez; Flores, Susana; Frutos, Eva; Patel, Harshada; Houghton, Robert
Design, Maintenance and Refurbishment of Turbines in a Collaborative Environment Conference
Proceedings of the 5th International Conference on Applied Human Factors and Ergonomics AHFE 2014, Kraków, Poland 19-23 July 2014, 2014.
@conference{Des/2014,
title = {Design, Maintenance and Refurbishment of Turbines in a Collaborative Environment},
author = {Arcadio Reyes-Lecuona and Luis Molina-Tanco and Daniel Gonzalez Toledo and Susana Flores and Eva Frutos and Harshada Patel and Robert Houghton},
editor = {T. Marek W. Karwowski T. Ahram},
url = {https://books.google.es/books?id=D4ZYBAAAQBAJ&lpg=PA122&ots=D7pDhkZ5aQ&dq=%22Design%2C%20Maintenance%20and%20Refurbishment%20of%20Turbines%20in%20a%20Collaborative%20Environment%22&hl=es&pg=PA122#v=onepage&q=%22Design,%20Maintenance%20and%20Refurbishment%},
year = {2014},
date = {2014-01-01},
booktitle = {Proceedings of the 5th International Conference on Applied Human Factors and Ergonomics AHFE 2014, Kraków, Poland 19-23 July 2014},
pages = {122–130},
abstract = {In this paper, a conceptual prototype of a collaborative tool for supporting decision making in the context of power plants maintenance is presented. The context of this industrial problem together with an analysis of the need for such a tool is also described. Then, a use case analysis is performed, as a conceptual specification of this tool. This conceptual prototype was evaluated using the cognitive walkthrough technique and the results of that evaluation process are also presented here.},
keywords = {},
pubstate = {published},
tppubtype = {conference}
}
In this paper, a conceptual prototype of a collaborative tool for supporting decision making in the context of power plants maintenance is presented. The context of this industrial problem together with an analysis of the need for such a tool is also described. Then, a use case analysis is performed, as a conceptual specification of this tool. This conceptual prototype was evaluated using the cognitive walkthrough technique and the results of that evaluation process are also presented here.
2013
López, Javier Hurtado; Casilari, Eduardo
An Adaptive Algorithm to Optimize the Dynamics of IEEE 802.15.4 Networks Conference
Proceedings of the 5th International Conference on Mobile Networks and Management (MONAMIrq2013), Cork (Ireland), September 23-25, 2013, 2013.
@conference{Jav/AnA/2013,
title = {An Adaptive Algorithm to Optimize the Dynamics of IEEE 802.15.4 Networks},
author = {Javier Hurtado López and Eduardo Casilari},
url = {https://link.springer.com/chapter/10.1007/978-3-319-04277-0_11},
year = {2013},
date = {2013-09-01},
booktitle = {Proceedings of the 5th International Conference on Mobile Networks and Management (MONAMIrq2013)},
pages = {136–148},
address = {Cork (Ireland), September 23-25, 2013},
keywords = {},
pubstate = {published},
tppubtype = {conference}
}
Rubia-Cuestas, Ernesto J.; Díaz-Estrella, Antonio
Analizador de Señales Inerciales para Tracking de Pies y Manos Conference
ACTAS DEL XIV CONGRESO INTERNACIONAL DE INTERACCIÓN PERSONA ORDENADOR (INTERACCIÓN 2013), 2013, ISBN: 9788469583524.
@conference{Ern/Ana/2013,
title = {Analizador de Señales Inerciales para Tracking de Pies y Manos},
author = {Ernesto J. Rubia-Cuestas and Antonio Díaz-Estrella},
editor = {Sandra Baldassarri y Jaime Urquiza José Antonio Macías},
isbn = {9788469583524},
year = {2013},
date = {2013-09-01},
booktitle = {ACTAS DEL XIV CONGRESO INTERNACIONAL DE INTERACCIÓN PERSONA ORDENADOR (INTERACCIÓN 2013)},
journal = {XIV Congreso Internacional de Interacción Persona-Ordenador. Madrid (Spain)},
pages = {91–94},
keywords = {},
pubstate = {published},
tppubtype = {conference}
}
García-Berdonés, Carmen; Aguilera, Davinia Trujillo; Hurtado, Juan Carlos Tojar
A Systems Engineering Approach To Curriculum Design. An Engineering Case Study Conference
2013 International Conference on Interactive Collaborative Learning (ICL), Kazan National Research Technological University Kazan National Research Technological University, Kazan, 2013, ISBN: 9781479901531.
@conference{Car/ASy/2013,
title = {A Systems Engineering Approach To Curriculum Design. An Engineering Case Study},
author = {Carmen García-Berdonés and Davinia Trujillo Aguilera and Juan Carlos Tojar Hurtado},
url = {http://riuma.uma.es/xmlui/handle/10630/7063},
doi = {10.1109/ICL.2013.6644662},
isbn = {9781479901531},
year = {2013},
date = {2013-09-01},
booktitle = {2013 International Conference on Interactive Collaborative Learning (ICL)},
pages = {618–624},
publisher = {Kazan National Research Technological University},
address = {Kazan},
organization = {Kazan National Research Technological University},
abstract = {This paper deals with the main problems when designing the engineering curriculum taking into account generic competences, and how a Systems Engineering approach can help in overcoming them. Here, the curriculum is considered as a system and a preliminary version of SysML model is proposed for it.},
keywords = {},
pubstate = {published},
tppubtype = {conference}
}
This paper deals with the main problems when designing the engineering curriculum taking into account generic competences, and how a Systems Engineering approach can help in overcoming them. Here, the curriculum is considered as a system and a preliminary version of SysML model is proposed for it.
Triviño-Cabrera, Alicia; Quintana, Alfonso Ariza; Casilari, Eduardo; Cano-Escribá, Juan-Carlos
Cooperative Layer-2 Based Routing Approach for Hybrid Wireless Mesh Networks Journal Article
In: China Communications, vol. 10, no. 8, pp. 88–99, 2013, ISSN: 1673-5447.
@article{Coo/2013,
title = {Cooperative Layer-2 Based Routing Approach for Hybrid Wireless Mesh Networks},
author = {Alicia Triviño-Cabrera and Alfonso Ariza Quintana and Eduardo Casilari and Juan-Carlos Cano-Escribá},
url = {https://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=6633748&tag=1},
doi = {10.1109/CC.2013.6633748},
issn = {1673-5447},
year = {2013},
date = {2013-08-01},
journal = {China Communications},
volume = {10},
number = {8},
pages = {88–99},
keywords = {},
pubstate = {published},
tppubtype = {article}
}
Poyade, Matthieu
Universidad de Málaga, 2013.
@phdthesis{Mot/2017,
title = {Motor Skill Training Using Virtual Reality and Haptic Interaction. A Case Study in Industrial Maintenance},
author = {Matthieu Poyade},
url = {http://radar.gsa.ac.uk/3566/1/Thesis.pdf},
year = {2013},
date = {2013-07-01},
address = {Reyes-Lecuona, A and Molina-Tanco, L.},
school = {Universidad de Málaga},
abstract = {The primary aim of this study is to evaluate the effectiveness of a Virtual Reality (VR)-simulated system in training fine motor skills that can be transferred to the performance of manual tasks in the real world. The VR system presented in this thesis enables training following fundamental methods such as part-task and whole-task training, in realistic simulations which are enhanced through haptic interaction. A fundamental advantage of using virtual reality in training is the ability to provide specific types of augmented feedback which cannot be provided in the real world.
The work presented in this thesis fits within the scope of ManuVAR (Manual work support throughout system lifecycle by exploiting Virtual and Augmented Reality), a European Union (EU) funded Seventh framework programme project which, among other things, aimed to support motor skill training in high value high knowledge manual work by using Virtual Reality technologies. A case study in industrial maintenance is presented: the metallographic replica, a nondestructive inspection technique that requires fine grinding and polishing of the inspected area. The motor skills required for the performance of these tasks must be particularly accurate. However, those motor skills consist of a tacit knowledge which is hard to transfer from experts to trainees.
This thesis focuses on the design and the evaluation of a VR training system which aims to supplement the motor skill training traditionally carried out for the performance of fine grinding and polishing tasks. The VR training system was designed on the basis of functional and customer requirement analyses which enabled defining the functionalities that allow solving the issues that arise when training in the real world.
Two experimental studies were designed to investigate whether a training program inspired by part-task and whole-task training methods, along with the provision of augmented feedback, enabled training the motor skills that are relevant for the performance of fine grinding and polishing tasks. The first experimental study explored the effectiveness of part-task training on the performance of a polishing task in a virtual environment. The second study evaluated the effectiveness of the complete training program for both tasks and investigated the capability of the VR training system to discriminate between several levels of expertise.
The outcomes of the experimental studies show the effectiveness of the training carried out on the VR training system, showing meaningful accuracy improvements throughout the performance of motor skills. This proves the internal validity of the proposed training. Moreover, the construct validity of the system is also suggested through the discrimination between expert and non-expert operators. On the basis of these findings, the external validity of the VR training system to train the fine motor skills that are relevant for the performance of fine grinding and polishing tasks in real operating environments can be established.
This work supports the hypothesis that VR enhanced with haptic force feedback can be useful for training fine motor skills, complementing the traditional training, which is carried out in real operating environments.},
keywords = {},
pubstate = {published},
tppubtype = {phdthesis}
}
The primary aim of this study is to evaluate the effectiveness of a Virtual Reality (VR)-simulated system in training fine motor skills that can be transferred to the performance of manual tasks in the real world. The VR system presented in this thesis enables training following fundamental methods such as part-task and whole-task training, in realistic simulations which are enhanced through haptic interaction. A fundamental advantage of using virtual reality in training is the ability to provide specific types of augmented feedback which cannot be provided in the real world.
The work presented in this thesis fits within the scope of ManuVAR (Manual work support throughout system lifecycle by exploiting Virtual and Augmented Reality), a European Union (EU) funded Seventh framework programme project which, among other things, aimed to support motor skill training in high value high knowledge manual work by using Virtual Reality technologies. A case study in industrial maintenance is presented: the metallographic replica, a nondestructive inspection technique that requires fine grinding and polishing of the inspected area. The motor skills required for the performance of these tasks must be particularly accurate. However, those motor skills consist of a tacit knowledge which is hard to transfer from experts to trainees.
This thesis focuses on the design and the evaluation of a VR training system which aims to supplement the motor skill training traditionally carried out for the performance of fine grinding and polishing tasks. The VR training system was designed on the basis of functional and customer requirement analyses which enabled defining the functionalities that allow solving the issues that arise when training in the real world.
Two experimental studies were designed to investigate whether a training program inspired by part-task and whole-task training methods, along with the provision of augmented feedback, enabled training the motor skills that are relevant for the performance of fine grinding and polishing tasks. The first experimental study explored the effectiveness of part-task training on the performance of a polishing task in a virtual environment. The second study evaluated the effectiveness of the complete training program for both tasks and investigated the capability of the VR training system to discriminate between several levels of expertise.
The outcomes of the experimental studies show the effectiveness of the training carried out on the VR training system, showing meaningful accuracy improvements throughout the performance of motor skills. This proves the internal validity of the proposed training. Moreover, the construct validity of the system is also suggested through the discrimination between expert and non-expert operators. On the basis of these findings, the external validity of the VR training system to train the fine motor skills that are relevant for the performance of fine grinding and polishing tasks in real operating environments can be established.
This work supports the hypothesis that VR enhanced with haptic force feedback can be useful for training fine motor skills, complementing the traditional training, which is carried out in real operating environments.
The work presented in this thesis fits within the scope of ManuVAR (Manual work support throughout system lifecycle by exploiting Virtual and Augmented Reality), a European Union (EU) funded Seventh framework programme project which, among other things, aimed to support motor skill training in high value high knowledge manual work by using Virtual Reality technologies. A case study in industrial maintenance is presented: the metallographic replica, a nondestructive inspection technique that requires fine grinding and polishing of the inspected area. The motor skills required for the performance of these tasks must be particularly accurate. However, those motor skills consist of a tacit knowledge which is hard to transfer from experts to trainees.
This thesis focuses on the design and the evaluation of a VR training system which aims to supplement the motor skill training traditionally carried out for the performance of fine grinding and polishing tasks. The VR training system was designed on the basis of functional and customer requirement analyses which enabled defining the functionalities that allow solving the issues that arise when training in the real world.
Two experimental studies were designed to investigate whether a training program inspired by part-task and whole-task training methods, along with the provision of augmented feedback, enabled training the motor skills that are relevant for the performance of fine grinding and polishing tasks. The first experimental study explored the effectiveness of part-task training on the performance of a polishing task in a virtual environment. The second study evaluated the effectiveness of the complete training program for both tasks and investigated the capability of the VR training system to discriminate between several levels of expertise.
The outcomes of the experimental studies show the effectiveness of the training carried out on the VR training system, showing meaningful accuracy improvements throughout the performance of motor skills. This proves the internal validity of the proposed training. Moreover, the construct validity of the system is also suggested through the discrimination between expert and non-expert operators. On the basis of these findings, the external validity of the VR training system to train the fine motor skills that are relevant for the performance of fine grinding and polishing tasks in real operating environments can be established.
This work supports the hypothesis that VR enhanced with haptic force feedback can be useful for training fine motor skills, complementing the traditional training, which is carried out in real operating environments.
García-Berdonés, Carmen; Molina-Tanco, Luis; Martín, Juan Pedro Peña; Lagos, Francisco García; Caparrós, Gonzalo Joya; Reyes-Lecuona, Arcadio; Aguilera, Davinia Trujillo
Evaluación De Diferentes Diseños De Aprendizaje Basado En Proyectos En El Entorno De Un Máster Profesional Conference
XXI Congreso Universitario de Innovación Educativa en las Enseñanzas Técnicas (CUIEET), Valencia, 2013.
@conference{Car/Eva/2013,
title = {Evaluación De Diferentes Diseños De Aprendizaje Basado En Proyectos En El Entorno De Un Máster Profesional},
author = {Carmen García-Berdonés and Luis Molina-Tanco and Juan Pedro Peña Martín and Francisco García Lagos and Gonzalo Joya Caparrós and Arcadio Reyes-Lecuona and Davinia Trujillo Aguilera},
year = {2013},
date = {2013-07-01},
booktitle = {XXI Congreso Universitario de Innovación Educativa en las Enseñanzas Técnicas (CUIEET)},
pages = {1260–1271},
address = {Valencia},
abstract = {Este trabajo presenta el diseño y puesta en marcha de algunas variantes del Aprendizaje
Basado en Proyectos (ABP) llevadas a cabo en un título de Máster en Sistemas Electrónicos.
Los resultados obtenidos animan a usar ABP en las titulaciones de Grado, pero confirman
que su aplicación no es trivial cuando los proyectos son complejos y es alto el nivel de
autoaprendizaje requerido al estudiante. Se discute también la importancia que tendría el
desarrollo de las competencias transversales para el correcto funcionamiento del ABP.},
keywords = {},
pubstate = {published},
tppubtype = {conference}
}
Este trabajo presenta el diseño y puesta en marcha de algunas variantes del Aprendizaje
Basado en Proyectos (ABP) llevadas a cabo en un título de Máster en Sistemas Electrónicos.
Los resultados obtenidos animan a usar ABP en las titulaciones de Grado, pero confirman
que su aplicación no es trivial cuando los proyectos son complejos y es alto el nivel de
autoaprendizaje requerido al estudiante. Se discute también la importancia que tendría el
desarrollo de las competencias transversales para el correcto funcionamiento del ABP.
Basado en Proyectos (ABP) llevadas a cabo en un título de Máster en Sistemas Electrónicos.
Los resultados obtenidos animan a usar ABP en las titulaciones de Grado, pero confirman
que su aplicación no es trivial cuando los proyectos son complejos y es alto el nivel de
autoaprendizaje requerido al estudiante. Se discute también la importancia que tendría el
desarrollo de las competencias transversales para el correcto funcionamiento del ABP.
Cano-García, José Manuel; Casilari, Eduardo; González-Parada, Eva
An empirical study on the performance of bluetooth scatternets Conference
Proceedings of the 9th International Wireless Communications and Mobile Computing Conference (IWCMC 2013), Cagliari (Italy), July 1-5, 2013, 2013.
@conference{Jos/Ane/2013,
title = {An empirical study on the performance of bluetooth scatternets},
author = {José Manuel Cano-García and Eduardo Casilari and Eva González-Parada},
url = {https://ieeexplore.ieee.org/document/6583696/},
doi = {10.1109/IWCMC.2013.6583696},
year = {2013},
date = {2013-01-01},
booktitle = {Proceedings of the 9th International Wireless Communications and Mobile Computing Conference (IWCMC 2013)},
pages = {1017–1022},
address = {Cagliari (Italy), July 1-5, 2013},
keywords = {},
pubstate = {published},
tppubtype = {conference}
}
Herrero-Reder, Ignacio; García-Berdonés, Carmen; González-Parada, Eva; Molina-Tanco, Luis; Pérez-Rodríguez, Eduardo; Urdiales-García, Cristina
Aprendizaje Cooperativo En El Ámbito De La Ingeniería: Una Experiencia De Iniciación Al Trabajo En Grupo Journal Article
In: Revista de Docencia Universitaria, vol. 11, pp. 221–251, 2013, ISSN: 1887-4592.
@article{Ign/Apr/2013,
title = {Aprendizaje Cooperativo En El Ámbito De La Ingeniería: Una Experiencia De Iniciación Al Trabajo En Grupo},
author = {Ignacio Herrero-Reder and Carmen García-Berdonés and Eva González-Parada and Luis Molina-Tanco and Eduardo Pérez-Rodríguez and Cristina Urdiales-García},
url = {http://red-u.net/redu/index.php/REDU/article/view/633},
issn = {1887-4592},
year = {2013},
date = {2013-01-01},
journal = {Revista de Docencia Universitaria},
volume = {11},
pages = {221–251},
abstract = {La enseñanza universitaria en el ámbito de la Ingeniería ha estado tradicionalmente orientada al trabajo individual del alumno, lo cual dificulta la adquisición de una de las aptitudes más valoradas en el mercado laboral, como es la competencia de trabajo en grupo. Este trabajo tiene como objetivo fomentar una componente de esta competencia, como es la interacción entre los estudiantes. Para ello se han diseñado y puesto en práctica una serie de actividades docentes en la asignatura ``Microcontroladores``, asignatura de 2º curso común a los estudios de Grado en Ingeniería de Sistemas Electrónicos, Sistemas de Telecomunicación, Telemática, Tecnologías de Telecomunicación, y Sonido e Imagen, en la Universidad de Málaga. Asimismo, se ha establecido un conjunto de indicadores que permiten evaluar el grado de consecución de la meta planteada. Los resultados han puesto de manifiesto que la interacción entre los estudiantes se puede fomentar mediante el conjunto de acciones planificadas, aunque las mismas requieren un esfuerzo adicional por parte del profesorado. Finalmente, se han propuesto algunas mejoras en el diseño del procedimiento, para mejorar su eficacia. Este trabajo se enmarca en el proyecto ACAI, cuyo objetivo es implementar un diseño curricular para el desarrollo de la competencia de Trabajo en Grupo. Así, se propone continuar la experiencia aquí presentada fomentando, para los mismos estudiantes, otras componentes de la competencia en asignaturas de 3º y 4º de los grados mencionados.},
keywords = {},
pubstate = {published},
tppubtype = {article}
}
La enseñanza universitaria en el ámbito de la Ingeniería ha estado tradicionalmente orientada al trabajo individual del alumno, lo cual dificulta la adquisición de una de las aptitudes más valoradas en el mercado laboral, como es la competencia de trabajo en grupo. Este trabajo tiene como objetivo fomentar una componente de esta competencia, como es la interacción entre los estudiantes. Para ello se han diseñado y puesto en práctica una serie de actividades docentes en la asignatura “Microcontroladores“, asignatura de 2º curso común a los estudios de Grado en Ingeniería de Sistemas Electrónicos, Sistemas de Telecomunicación, Telemática, Tecnologías de Telecomunicación, y Sonido e Imagen, en la Universidad de Málaga. Asimismo, se ha establecido un conjunto de indicadores que permiten evaluar el grado de consecución de la meta planteada. Los resultados han puesto de manifiesto que la interacción entre los estudiantes se puede fomentar mediante el conjunto de acciones planificadas, aunque las mismas requieren un esfuerzo adicional por parte del profesorado. Finalmente, se han propuesto algunas mejoras en el diseño del procedimiento, para mejorar su eficacia. Este trabajo se enmarca en el proyecto ACAI, cuyo objetivo es implementar un diseño curricular para el desarrollo de la competencia de Trabajo en Grupo. Así, se propone continuar la experiencia aquí presentada fomentando, para los mismos estudiantes, otras componentes de la competencia en asignaturas de 3º y 4º de los grados mencionados.
González-Cañete, Francisco J.; Casilari, Eduardo; Triviño-Cabrera, Alicia
Cross-Layer Interception Caching for MANETs Journal Article
In: Lecture Notes of the Institute for Computer Sciences, Social Informatics and Telecommunications Engineering (LNICST), vol. 111, pp. 196–213, 2013.
@article{Fra/Cro/2013,
title = {Cross-Layer Interception Caching for MANETs},
author = {Francisco J. González-Cañete and Eduardo Casilari and Alicia Triviño-Cabrera},
year = {2013},
date = {2013-01-01},
journal = {Lecture Notes of the Institute for Computer Sciences, Social Informatics and Telecommunications Engineering (LNICST)},
volume = {111},
pages = {196–213},
keywords = {},
pubstate = {published},
tppubtype = {article}
}
Galdón, P. M.; Madrid, I.; López, J. L.; Rubia-Cuestas, Ernesto J.; Díaz-Estrella, Antonio
Implementación de Iconos Hápticos para Mejorar la Experiencia de las Personas con Discapacidad Visual en el Uso de Smartphones Journal Article
In: XIV Congreso Internacional de Interacción Persona-Ordenador, 2013.
@article{Gal/Imp/2013,
title = {Implementación de Iconos Hápticos para Mejorar la Experiencia de las Personas con Discapacidad Visual en el Uso de Smartphones},
author = {P. M. Galdón and I. Madrid and J. L. López and Ernesto J. Rubia-Cuestas and Antonio Díaz-Estrella},
year = {2013},
date = {2013-01-01},
journal = {XIV Congreso Internacional de Interacción Persona-Ordenador},
keywords = {},
pubstate = {published},
tppubtype = {article}
}
Galdón, P. M.; Madrid, R. Ignacio; Rubia-Cuestas, Ernesto J.; Díaz-Estrella, Antonio; Gonzalez, Lourdes
Enhancing mobile phones for people with visual impairments through haptic icons: The effect of learning processes Journal Article
In: Assistive Technology, vol. 25, pp. 80–87, 2013.
@article{Enh/2012,
title = {Enhancing mobile phones for people with visual impairments through haptic icons: The effect of learning processes},
author = {P. M. Galdón and R. Ignacio Madrid and Ernesto J. Rubia-Cuestas and Antonio Díaz-Estrella and Lourdes Gonzalez},
url = {http://www.tandfonline.com/doi/abs/10.1080/10400435.2012.715112},
year = {2013},
date = {2013-01-01},
journal = {Assistive Technology},
volume = {25},
pages = {80–87},
keywords = {},
pubstate = {published},
tppubtype = {article}
}
Yuste-Delgado, Antonio-Jesús; Triviño-Cabrera, Alicia; Casilari, Eduardo
Type-2 fuzzy decision support system to optimise MANET integration into infrastructure-based wireless systems Journal Article
In: Expert Systems with Applications, vol. 40, no. 7, pp. 2552–2567, 2013, ISSN: 09574174.
@article{Yuste20132552,
title = {Type-2 fuzzy decision support system to optimise MANET integration into infrastructure-based wireless systems},
author = {Antonio-Jesús Yuste-Delgado and Alicia Triviño-Cabrera and Eduardo Casilari},
doi = {10.1016/j.eswa.2012.10.063},
issn = {09574174},
year = {2013},
date = {2013-01-01},
journal = {Expert Systems with Applications},
volume = {40},
number = {7},
pages = {2552–2567},
abstract = {Mobile ad hoc networks are able to extend the coverage area of Internet access points by establishing multihop communication paths. Due to diverse factors such as the mobility of the nodes, the propagation conditions or the traffic status, the communication paths present a lifetime. In fact, the quality of the Internet connection mainly depends on the durability of the employed communication routes. In order to improve the network performance, the nodes should select the best route in terms of its remaining lifetime. Since the factors impacting the route lifetime are unpredictable, the route remaining lifetime cannot be analytically derived. Under these circumstances, a fuzzy-logic system outstands as a potential solution to estimate the stability of the routes. This paper analyses the potentiality of this kind of solution. In particular, the paper presents a fuzzy logic system which should be installed in the mobile nodes to distributedly identify the stable routes. In particular, the system is supported by an interval-based type-2 fuzzy logic. Being a type-2 fuzzy logic system, it is able to cope with inexact estimations. This ability is necessary to avoid the use of additional messages which will occupy the scarce wireless medium. On the other hand, an interval-based fuzzy system provides the simplicity demanded by the energy-constrained mobile devices. As a novelty, the two outputs of the interval-based fuzzy system are employed. The use of each output depends on the traffic state of the mobile node. By means of extensive simulations, we demonstrate the goodness of the proposed system. © 2012 Elsevier B.V. All rights reserved.},
keywords = {},
pubstate = {published},
tppubtype = {article}
}
Mobile ad hoc networks are able to extend the coverage area of Internet access points by establishing multihop communication paths. Due to diverse factors such as the mobility of the nodes, the propagation conditions or the traffic status, the communication paths present a lifetime. In fact, the quality of the Internet connection mainly depends on the durability of the employed communication routes. In order to improve the network performance, the nodes should select the best route in terms of its remaining lifetime. Since the factors impacting the route lifetime are unpredictable, the route remaining lifetime cannot be analytically derived. Under these circumstances, a fuzzy-logic system outstands as a potential solution to estimate the stability of the routes. This paper analyses the potentiality of this kind of solution. In particular, the paper presents a fuzzy logic system which should be installed in the mobile nodes to distributedly identify the stable routes. In particular, the system is supported by an interval-based type-2 fuzzy logic. Being a type-2 fuzzy logic system, it is able to cope with inexact estimations. This ability is necessary to avoid the use of additional messages which will occupy the scarce wireless medium. On the other hand, an interval-based fuzzy system provides the simplicity demanded by the energy-constrained mobile devices. As a novelty, the two outputs of the interval-based fuzzy system are employed. The use of each output depends on the traffic state of the mobile node. By means of extensive simulations, we demonstrate the goodness of the proposed system. © 2012 Elsevier B.V. All rights reserved.
Cuevas-Rodríguez, María; Poyade, Matthieu; Reyes-Lecuona, Arcadio; Molina-Tanco, Luis
A VRPN server for haptic devices using OpenHaptics 3.0 Conference
New Trends in Interaction, Virtual Reality and Modeling, Human–Computer Interaction Series Springer London, 2013, ISBN: 9781450313148, (cited By (since 1996)0; Conference of org.apache.xalan.xsltc.dom.DOMAdapter@16829869 ; Conference Date: org.apache.xalan.xsltc.dom.DOMAdapter@57e4210a Through org.apache.xalan.xsltc.dom.DOMAdapter@4235449a; Conference Code:93818).
@conference{Cuevas-Rodriguez2012,
title = {A VRPN server for haptic devices using OpenHaptics 3.0},
author = {María Cuevas-Rodríguez and Matthieu Poyade and Arcadio Reyes-Lecuona and Luis Molina-Tanco},
editor = {Victor M. R. Penichet and Antonio Peñalver and José A. Gallud},
url = {http://link.springer.com/chapter/10.1007/978-1-4471-5445-7_6#},
doi = {10.1145/2379636.2379667},
isbn = {9781450313148},
year = {2013},
date = {2013-01-01},
booktitle = {New Trends in Interaction, Virtual Reality and Modeling},
journal = {ACM International Conference Proceeding Series},
publisher = {Springer London},
series = {Human–Computer Interaction Series},
abstract = {This paper presents an implementation based on the Virtual Reality Peripheral Network (VRPN 7.18) to handle connectivity between Virtual Reality (VR) applications and SensAble Technology Phantom Haptic Devices using the OpenHaptics 3.0 Haptic Library Application Programmable Interface (HLAPI). VRPN offers a client-server based architecture to support network transparent connectivity between VR applications and a set of physical interaction devices. VRPN suggests a set of classes to handle various physical devices types. Originally, the haptic rendering was supported by the obsolete GHOST API, provided by SensAble Technologies, within a specific VRPN class dedicated to Phantom devices. The proposed implementation consists of a) new classes that support haptic device server and VR applications connectivity, allow to specify arbitrary 3D object information to haptically render geometries and report applied force, angle at contact point, Surface Contact Point (SCP) and Depth of Penetration (DOP); and b) an upgrade of the Phantom dedicated VRPN class to handle haptic rendering using OpenHaptics HLAPI functionalities to manage device state and forces calculation. Moreover, the integration of the HLAPI implementation in VRPN remains respectful to VRPN inheritance and architecture standards: Tracker and Button classes remain unchanged. Copyright 2012 ACM.},
note = {cited By (since 1996)0; Conference of org.apache.xalan.xsltc.dom.DOMAdapter@16829869 ; Conference Date: org.apache.xalan.xsltc.dom.DOMAdapter@57e4210a Through org.apache.xalan.xsltc.dom.DOMAdapter@4235449a; Conference Code:93818},
keywords = {},
pubstate = {published},
tppubtype = {conference}
}
This paper presents an implementation based on the Virtual Reality Peripheral Network (VRPN 7.18) to handle connectivity between Virtual Reality (VR) applications and SensAble Technology Phantom Haptic Devices using the OpenHaptics 3.0 Haptic Library Application Programmable Interface (HLAPI). VRPN offers a client-server based architecture to support network transparent connectivity between VR applications and a set of physical interaction devices. VRPN suggests a set of classes to handle various physical devices types. Originally, the haptic rendering was supported by the obsolete GHOST API, provided by SensAble Technologies, within a specific VRPN class dedicated to Phantom devices. The proposed implementation consists of a) new classes that support haptic device server and VR applications connectivity, allow to specify arbitrary 3D object information to haptically render geometries and report applied force, angle at contact point, Surface Contact Point (SCP) and Depth of Penetration (DOP); and b) an upgrade of the Phantom dedicated VRPN class to handle haptic rendering using OpenHaptics HLAPI functionalities to manage device state and forces calculation. Moreover, the integration of the HLAPI implementation in VRPN remains respectful to VRPN inheritance and architecture standards: Tracker and Button classes remain unchanged. Copyright 2012 ACM.
Martín, Juan Pedro Peña; Romero-Jerez, Juan Manuel; Téllez-Labao, Concepción
Performance of TAS/MRC Wireless Systems under Hoyt Fading Channels Journal Article
In: IEEE TRANSACTIONS ON WIRELESS COMMUNICATIONS, vol. 12, pp. 3350–3359, 2013.
@article{Jua/Per/2013,
title = {Performance of TAS/MRC Wireless Systems under Hoyt Fading Channels},
author = {Juan Pedro Peña Martín and Juan Manuel Romero-Jerez and Concepción Téllez-Labao},
year = {2013},
date = {2013-01-01},
journal = {IEEE TRANSACTIONS ON WIRELESS COMMUNICATIONS},
volume = {12},
pages = {3350–3359},
keywords = {},
pubstate = {published},
tppubtype = {article}
}
González-Cañete, Francisco J.; Casilari, Eduardo
A Study of the Performance of Cooperative Caching in Static Ad Hoc Networks Journal Article
In: International Journal on Advances in Networks and Services, vol. 6, no. 1 & 2, pp. 68–79, 2013.
@article{ASt/2013,
title = {A Study of the Performance of Cooperative Caching in Static Ad Hoc Networks},
author = {Francisco J. González-Cañete and Eduardo Casilari},
year = {2013},
date = {2013-01-01},
journal = {International Journal on Advances in Networks and Services},
volume = {6},
number = {1 & 2},
pages = {68–79},
keywords = {},
pubstate = {published},
tppubtype = {article}
}
Rubia-Cuestas, Ernesto J.; Díaz-Estrella, Antonio
Improved pedestrian tracking through Kalman covariance error selective reset Journal Article
In: Electronics Letters, vol. 49, no. 7, pp. 464 – 465, 2013.
@article{Ern/Imp/2013,
title = {Improved pedestrian tracking through Kalman covariance error selective reset},
author = {Ernesto J. Rubia-Cuestas and Antonio Díaz-Estrella},
year = {2013},
date = {2013-01-01},
journal = {Electronics Letters},
volume = {49},
number = {7},
pages = {464 – 465},
keywords = {},
pubstate = {published},
tppubtype = {article}
}
Rubia-Cuestas, Ernesto J.; Díaz-Estrella, Antonio
ORION: One More Step in Virtual Reality Interaction Book Chapter
In: (London), Springer (Ed.): Chapter 4, pp. 45–61, New Trends in Interaction, Virtual Reality and Modeling, 2013, ISBN: 9781447154440.
@inbook{Ern/ORI/2013,
title = {ORION: One More Step in Virtual Reality Interaction},
author = {Ernesto J. Rubia-Cuestas and Antonio Díaz-Estrella},
editor = {Springer (London)},
isbn = {9781447154440},
year = {2013},
date = {2013-01-01},
journal = {New Trends in Interaction, Virtual Reality and Modeling},
pages = {45–61},
publisher = {New Trends in Interaction, Virtual Reality and Modeling},
chapter = {4},
series = {Human–Computer Interaction Series},
keywords = {},
pubstate = {published},
tppubtype = {inbook}
}
Pérez, Marcos Santos; González-Parada, Eva; Cano-García, José Manuel
ECA-based control interface on Android for home automation system Conference
Las Vegas, NV, 2013, ISBN: 9781467313612, (Conference of org.apache.xalan.xsltc.dom.DOMAdapter@2c9e3e8a ; Conference Date: org.apache.xalan.xsltc.dom.DOMAdapter@491bece8 Through org.apache.xalan.xsltc.dom.DOMAdapter@485e98d7; Conference Code:96592).
@conference{Santos-Perez201370,
title = {ECA-based control interface on Android for home automation system},
author = {Marcos Santos Pérez and Eva González-Parada and José Manuel Cano-García},
doi = {10.1109/ICCE.2013.6486799},
isbn = {9781467313612},
year = {2013},
date = {2013-01-01},
journal = {Digest of Technical Papers - IEEE International Conference on Consumer Electronics},
pages = {70–71},
address = {Las Vegas, NV},
abstract = {Historically, Embodied Conversational Agents (ECAs) have been used as virtual assistants that make easier the access to information or help in performing complex tasks. Due to their high computational requirements ECAs are usually run on desktop computers, but with the recent development of hand-held devices both in hardware and software, it becames neccessary to move ECAs to that new mobile scenario. Thus, we propose an open-source based platform for developing ECA based interfaces on Android-equipped devices. We also present a prototype for controlling a home automation system. © 2013 IEEE.},
note = {Conference of org.apache.xalan.xsltc.dom.DOMAdapter@2c9e3e8a ; Conference Date: org.apache.xalan.xsltc.dom.DOMAdapter@491bece8 Through org.apache.xalan.xsltc.dom.DOMAdapter@485e98d7; Conference Code:96592},
keywords = {},
pubstate = {published},
tppubtype = {conference}
}
Historically, Embodied Conversational Agents (ECAs) have been used as virtual assistants that make easier the access to information or help in performing complex tasks. Due to their high computational requirements ECAs are usually run on desktop computers, but with the recent development of hand-held devices both in hardware and software, it becames neccessary to move ECAs to that new mobile scenario. Thus, we propose an open-source based platform for developing ECA based interfaces on Android-equipped devices. We also present a prototype for controlling a home automation system. © 2013 IEEE.
2012
Otamendi, Xabier Bragaña
Caracterización del consumo en redes Bluetooth Low Energy, (Trabajo Fin de Máster, Máster en Tecnologías de Telecomunicación) Masters Thesis
Universidad de Málaga, Supervisor: Eduardo Casilari, 2012.
@mastersthesis{Xab/Car/2012,
title = {Caracterización del consumo en redes Bluetooth Low Energy, (Trabajo Fin de Máster, Máster en Tecnologías de Telecomunicación)},
author = {Xabier Bragaña Otamendi},
year = {2012},
date = {2012-12-01},
address = {Supervisor: Eduardo Casilari},
school = {Universidad de Málaga},
keywords = {},
pubstate = {published},
tppubtype = {mastersthesis}
}
López, Javier Hurtado
Optimización dinámica de redes IEEE 802.15.4, (Trabajo Fin de Máster, Máster en Tecnologías de Telecomunicación) Masters Thesis
Universidad de Málaga, Supervisor: Eduardo Casilari, 2012.
@mastersthesis{Jav/Opt/2012,
title = {Optimización dinámica de redes IEEE 802.15.4, (Trabajo Fin de Máster, Máster en Tecnologías de Telecomunicación)},
author = {Javier Hurtado López},
year = {2012},
date = {2012-11-01},
address = {Supervisor: Eduardo Casilari},
school = {Universidad de Málaga},
keywords = {},
pubstate = {published},
tppubtype = {mastersthesis}
}
Ruiz, Juan Jesús Téllez
Desarrollo de un sistema de control sobre dispositivos vestibles (Proyecto Fin de Carrera, Ing. Técnica de Telecomunicación) Masters Thesis
Universidad de Málaga, Supervisor: Eduardo Casilari, 2012.
@mastersthesis{Jua/Des/2012,
title = {Desarrollo de un sistema de control sobre dispositivos vestibles (Proyecto Fin de Carrera, Ing. Técnica de Telecomunicación)},
author = {Juan Jesús Téllez Ruiz},
year = {2012},
date = {2012-11-01},
address = {Supervisor: Eduardo Casilari},
school = {Universidad de Málaga},
keywords = {},
pubstate = {published},
tppubtype = {mastersthesis}
}
González-Cañete, Francisco J.; Casilari, Eduardo; Triviño-Cabrera, Alicia
Cross-layer Interception Caching for MANETs Conference
Proceedings of the 4th International Conference on Ad Hoc Networks (AdHocNets 2012), Paris (France), October 16-17, 2012, 2012.
@conference{Fra/Cro/2012,
title = {Cross-layer Interception Caching for MANETs},
author = {Francisco J. González-Cañete and Eduardo Casilari and Alicia Triviño-Cabrera},
url = {https://link.springer.com/chapter/10.1007/978-3-642-36958-2_14},
doi = {10.1007/978-3-642-36958-2_14},
year = {2012},
date = {2012-10-01},
booktitle = {Proceedings of the 4th International Conference on Ad Hoc Networks (AdHocNets 2012)},
address = {Paris (France), October 16-17, 2012},
keywords = {},
pubstate = {published},
tppubtype = {conference}
}
Adbib, Farah
Evaluación del consumo en nodos sensores ZigBee/802.15.4 en condiciones de ruido (Proyecto Fin de Carrera, Ingeniería de Telecomunicación) Masters Thesis
Universidad de Málaga, Supervisor: Eduardo Casilari, 2012.
@mastersthesis{Far/Eva/2012,
title = {Evaluación del consumo en nodos sensores ZigBee/802.15.4 en condiciones de ruido (Proyecto Fin de Carrera, Ingeniería de Telecomunicación)},
author = {Farah Adbib},
year = {2012},
date = {2012-10-01},
address = {Supervisor: Eduardo Casilari},
school = {Universidad de Málaga},
keywords = {},
pubstate = {published},
tppubtype = {mastersthesis}
}
González-Cañete, Francisco J.; Casilari, Eduardo
Evaluation of a Cooperative Caching Scheme for Grid Ad Hoc Networks Conference
Proceedings of the th International Conference on Mobile Ubiquitous Computing, Systems, Services and Technologies (UBICOMM 2012), Barcelona (Spain), September 23-28, 2012, 2012.
@conference{Fra/Eva,
title = {Evaluation of a Cooperative Caching Scheme for Grid Ad Hoc Networks},
author = {Francisco J. González-Cañete and Eduardo Casilari},
url = {http://www.thinkmind.org/index.php?view=article&articleid=ubicomm_2012_4_20_10130},
year = {2012},
date = {2012-09-01},
booktitle = {Proceedings of the th International Conference on Mobile Ubiquitous Computing, Systems, Services and Technologies (UBICOMM 2012)},
pages = {97–103},
address = {Barcelona (Spain), September 23-28, 2012},
keywords = {},
pubstate = {published},
tppubtype = {conference}
}
Cano-García, José Manuel; Casilari, Eduardo
A Study on the Effect of Packet Collisions on Battery Lifetime of 802.15.4 Motes Conference
Proceedings of the Sixth International Conference on Sensor Technologies and Applications (SENSORCOMM 2012), Rome (Italy), August 19-24, 2012, 2012.
@conference{Jos/ASt/2012,
title = {A Study on the Effect of Packet Collisions on Battery Lifetime of 802.15.4 Motes},
author = {José Manuel Cano-García and Eduardo Casilari},
url = {https://www.thinkmind.org/download.php?articleid=sensorcomm_2012_10_10_10077},
year = {2012},
date = {2012-08-01},
booktitle = {Proceedings of the Sixth International Conference on Sensor Technologies and Applications (SENSORCOMM 2012)},
pages = {209–214},
address = {Rome (Italy), August 19-24, 2012},
keywords = {},
pubstate = {published},
tppubtype = {conference}
}
Luque-Giráldez, J. Rafael; Morón-Fernández, María José; Casilari, Eduardo
Analytical and Empirical Evaluation of the Impact of Gaussian Noise on the Modulations employed by Bluetooth Enhanced Data Rates Journal Article
In: EURASIP Journal on Wireless Communications and Networking, vol. 12, no. 1, 2012.
@article{JRa/Ana/2012,
title = {Analytical and Empirical Evaluation of the Impact of Gaussian Noise on the Modulations employed by Bluetooth Enhanced Data Rates},
author = {J. Rafael Luque-Giráldez and María José Morón-Fernández and Eduardo Casilari},
year = {2012},
date = {2012-03-01},
journal = {EURASIP Journal on Wireless Communications and Networking},
volume = {12},
number = {1},
keywords = {},
pubstate = {published},
tppubtype = {article}
}
González-Cañete, Francisco J.
Estudio y mejora de los mecanismos de caché en redes inalámbricas ad hoc PhD Thesis
Universidad de Málaga, 2012.
@phdthesis{Fra/Est/2012,
title = {Estudio y mejora de los mecanismos de caché en redes inalámbricas ad hoc},
author = {Francisco J. González-Cañete},
year = {2012},
date = {2012-03-01},
address = {Supervisor: Eduardo Casilari},
school = {Universidad de Málaga},
keywords = {},
pubstate = {published},
tppubtype = {phdthesis}
}
Carballo, Mario Cortés
Desarrollo de un sistema de telediagnóstico y telemonitorización remota para espirómetro Bluetooth (Proyecto Fin de Carrera, Ing. Técnica de Telecomunicación) Masters Thesis
Universidad de Málaga, Supervisor: Eduardo Casilari, 2012.
@mastersthesis{Mar/Des/2012,
title = {Desarrollo de un sistema de telediagnóstico y telemonitorización remota para espirómetro Bluetooth (Proyecto Fin de Carrera, Ing. Técnica de Telecomunicación)},
author = {Mario Cortés Carballo},
year = {2012},
date = {2012-02-01},
address = {Supervisor: Eduardo Casilari},
school = {Universidad de Málaga},
keywords = {},
pubstate = {published},
tppubtype = {mastersthesis}
}
González-Cañete, Francisco J.; Casilari, Eduardo; Triviño-Cabrera, Alicia
A cross layer interception and redirection cooperative caching scheme for MANETs Journal Article
In: EURASIP Journal on Wireless Communications and Networking, vol. 2012, no. 1, 2012.
@article{Fra/Acr/2012,
title = {A cross layer interception and redirection cooperative caching scheme for MANETs},
author = {Francisco J. González-Cañete and Eduardo Casilari and Alicia Triviño-Cabrera},
url = {https://jwcn-eurasipjournals.springeropen.com/articles/10.1186/1687-1499-2012-63},
year = {2012},
date = {2012-02-01},
journal = {EURASIP Journal on Wireless Communications and Networking},
volume = {2012},
number = {1},
keywords = {},
pubstate = {published},
tppubtype = {article}
}
Romero-Jerez, Juan Manuel; Martín, Juan Pedro Peña
ASER of Rectangular MQAM in Noise-Limited and Interference-Limited MIMO MRC Systems Journal Article
In: Wireless Communications Letters, IEEE, vol. 1, no. 1, pp. 18–21, 2012, ISSN: 2162-2337.
@article{6096325,
title = {ASER of Rectangular MQAM in Noise-Limited and Interference-Limited MIMO MRC Systems},
author = {Juan Manuel Romero-Jerez and Juan Pedro Peña Martín},
doi = {10.1109/WCL.2012.120211.110111},
issn = {2162-2337},
year = {2012},
date = {2012-02-01},
journal = {Wireless Communications Letters, IEEE},
volume = {1},
number = {1},
pages = {18–21},
keywords = {},
pubstate = {published},
tppubtype = {article}
}
Poyade, Matthieu; Molina-Tanco, Luis; Reyes-Lecuona, Arcadio; Langley, Alyson; D’Cruz, Mirabelle; Frutos, Eva; Flores, Susana
Validation of a haptic virtual reality simulation in the context of industrial maintenance Conference
JVRC 2012, Madrid, 2012.
@conference{Mat/Val/2012,
title = {Validation of a haptic virtual reality simulation in the context of industrial maintenance},
author = {Matthieu Poyade and Luis Molina-Tanco and Arcadio Reyes-Lecuona and Alyson Langley and Mirabelle D'Cruz and Eva Frutos and Susana Flores},
year = {2012},
date = {2012-01-01},
booktitle = {JVRC 2012},
address = {Madrid},
keywords = {},
pubstate = {published},
tppubtype = {conference}
}
Quintana, Alfonso Ariza; Casilari, Eduardo; Hurtado-López, Francisco-Javier
An Integrated OMNeT++Implementation of 802.11 Conference
5th International Workshop on OMNeT+ (OMNeT++ 2012). SIMUTools 2012, Desenzano del Garda (Italy), March 19-23, 2012, 2012.
@conference{Alf/AnI/2012,
title = {An Integrated OMNeT++Implementation of 802.11},
author = {Alfonso Ariza Quintana and Eduardo Casilari and Francisco-Javier Hurtado-López},
url = {http://webpersonal.uma.es/~ECASILARI/Research/Papers/Congresos/2012/An%20Integrated%20OMNeT%20Implementation%20of%20802-11.pdf},
year = {2012},
date = {2012-01-01},
booktitle = {5th International Workshop on OMNeT+ (OMNeT++ 2012). SIMUTools 2012},
address = {Desenzano del Garda (Italy), March 19-23, 2012},
keywords = {},
pubstate = {published},
tppubtype = {conference}
}
Triviño-Cabrera, Alicia; Quintana, Alfonso Ariza; Casilari, Eduardo; Cano-Escribá, Juan-Carlos
On the Benefits of a Cooperative Layer-2 Based Routing Approach for Hybrid Wireless Mesh Networks Conference
2nd Workshop “Future Internet: Efficiency in High-Speed Networks” (W-FIERRO 2012), Cartagena (Spain), July 19-29, 2012, 2012.
@conference{Ali/Dis/2012,
title = {On the Benefits of a Cooperative Layer-2 Based Routing Approach for Hybrid Wireless Mesh Networks},
author = {Alicia Triviño-Cabrera and Alfonso Ariza Quintana and Eduardo Casilari and Juan-Carlos Cano-Escribá},
url = {https://rechercheisidore.fr/search/resource/?uri=10670/1.sucx8z},
year = {2012},
date = {2012-01-01},
booktitle = {2nd Workshop ``Future Internet: Efficiency in High-Speed Networks'' (W-FIERRO 2012)},
address = {Cartagena (Spain), July 19-29, 2012},
keywords = {},
pubstate = {published},
tppubtype = {conference}
}
González-Cañete, Francisco J.; Casilari, Eduardo
Evaluation of a Redirection Technique in Cooperative Caching for MANETs Conference
Proceedings of the ACM International Symposium on Performance Evaluation of Wireless Ad Hoc, Sensor, and Ubiquitous Networks (PEWASUN 2012), Paphos (Cyprus), October 21-22, 2012, 2012.
@conference{Fra/Eva/2012,
title = {Evaluation of a Redirection Technique in Cooperative Caching for MANETs},
author = {Francisco J. González-Cañete and Eduardo Casilari},
url = {https://dl.acm.org/citation.cfm?id=2387036},
year = {2012},
date = {2012-01-01},
booktitle = {Proceedings of the ACM International Symposium on Performance Evaluation of Wireless Ad Hoc, Sensor, and Ubiquitous Networks (PEWASUN 2012)},
pages = {47–52},
address = {Paphos (Cyprus), October 21-22, 2012},
keywords = {},
pubstate = {published},
tppubtype = {conference}
}
García, E. Villanueva; Arrebola-Pérez, Fabián; Díaz-Estrella, Antonio
Finger detection using Kinect Conference
Proceedings of IADIS CGVCVIP 2012 Conference (Lisbon, Portugal, July 2012), 2012.
@conference{jfvillanueva2,
title = {Finger detection using Kinect},
author = {E. Villanueva García and Fabián Arrebola-Pérez and Antonio Díaz-Estrella},
year = {2012},
date = {2012-01-01},
booktitle = {Proceedings of IADIS CGVCVIP 2012 Conference (Lisbon, Portugal, July 2012)},
pages = {182–184},
abstract = {Image processing is used in several areas for different purposes. This paper explains how to analyze the extracted image of the Kinect depth camera to get information about the contained fingers in it and its tracking to implement a 3D gesture interface. It is a known task that has a lot of solutions, but a new way has been described using Kinect device to simplify background extraction and shader processing to increase framerate. Two algorithms have been implemented.},
keywords = {},
pubstate = {published},
tppubtype = {conference}
}
Image processing is used in several areas for different purposes. This paper explains how to analyze the extracted image of the Kinect depth camera to get information about the contained fingers in it and its tracking to implement a 3D gesture interface. It is a known task that has a lot of solutions, but a new way has been described using Kinect device to simplify background extraction and shader processing to increase framerate. Two algorithms have been implemented.
Pérez, Marcos Santos; González-Parada, Eva; Cano-García, José Manuel
Topic-dependent language model switching for embedded automatic speech recognition Journal Article
In: Advances in Intelligent and Soft Computing, vol. 153 AISC, pp. 235–242, 2012, ISSN: 18675662, (Conference of org.apache.xalan.xsltc.dom.DOMAdapter@6625d1ea ; Conference Date: org.apache.xalan.xsltc.dom.DOMAdapter@3cf88e0a Through org.apache.xalan.xsltc.dom.DOMAdapter@623551cb; Conference Code:89851).
@article{Santos-Perez2012235,
title = {Topic-dependent language model switching for embedded automatic speech recognition},
author = {Marcos Santos Pérez and Eva González-Parada and José Manuel Cano-García},
doi = {10.1007/978-3-642-28783-1_30},
issn = {18675662},
year = {2012},
date = {2012-01-01},
journal = {Advances in Intelligent and Soft Computing},
volume = {153 AISC},
pages = {235–242},
address = {Salamanca},
abstract = {Embedded devices incorporate everyday new applications in different domains due to their increasing computational power.Many of these applications have a voice interface that uses Automatic Speech Recognition (ASR). When the complexity of the language model is high, it is common to use an external server to perform the recognition at the expense of certain limitations (network availability, latency, etc.). This paper focuses on a new proposal to improve the efficiency of the usage of the language model in a recognizer for multiple domains. The idea is based on the selection of a proper language model for each domain within the ASR system. © 2012 Springer-Verlag.},
note = {Conference of org.apache.xalan.xsltc.dom.DOMAdapter@6625d1ea ; Conference Date: org.apache.xalan.xsltc.dom.DOMAdapter@3cf88e0a Through org.apache.xalan.xsltc.dom.DOMAdapter@623551cb; Conference Code:89851},
keywords = {},
pubstate = {published},
tppubtype = {article}
}
Embedded devices incorporate everyday new applications in different domains due to their increasing computational power.Many of these applications have a voice interface that uses Automatic Speech Recognition (ASR). When the complexity of the language model is high, it is common to use an external server to perform the recognition at the expense of certain limitations (network availability, latency, etc.). This paper focuses on a new proposal to improve the efficiency of the usage of the language model in a recognizer for multiple domains. The idea is based on the selection of a proper language model for each domain within the ASR system. © 2012 Springer-Verlag.
Morales, Miguel Ángel Carmona
Desarrollo de una aplicación de telemedicina para seguimiento y localización de pacientes (Proyecto Fin de Carrera, Ingeniería de Telecomunicación) Masters Thesis
Universidad de Málaga, Supervisor: Eduardo Casilari, 2012.
@mastersthesis{Mig/Des/2012,
title = {Desarrollo de una aplicación de telemedicina para seguimiento y localización de pacientes (Proyecto Fin de Carrera, Ingeniería de Telecomunicación)},
author = {Miguel Ángel Carmona Morales},
year = {2012},
date = {2012-01-01},
address = {Supervisor: Eduardo Casilari},
school = {Universidad de Málaga},
keywords = {},
pubstate = {published},
tppubtype = {mastersthesis}
}
Delgado, Antonio J. Yuste
Descubrimiento adaptativo de pasarelas en redes MANET conectadas a Internet PhD Thesis
Universidad de Málaga, 2012.
@phdthesis{Yus/Des,
title = {Descubrimiento adaptativo de pasarelas en redes MANET conectadas a Internet},
author = {Antonio J. Yuste Delgado},
year = {2012},
date = {2012-01-01},
school = {Universidad de Málaga},
keywords = {},
pubstate = {published},
tppubtype = {phdthesis}
}
Velasco-Álvarez, Francisco
Interfaz cerebro-computadora: paradigmas de navegación basados en una tarea de imaginación motora PhD Thesis
Universidad de Málaga, 2012.
@phdthesis{Int/2012,
title = {Interfaz cerebro-computadora: paradigmas de navegación basados en una tarea de imaginación motora},
author = {Francisco Velasco-Álvarez},
year = {2012},
date = {2012-01-01},
school = {Universidad de Málaga},
abstract = {Una Interfaz Cerebro-Computadora o BCI (Brain-Computer Interface) es un
sistema que permite que las personas controlen un elemento externo por medio de su
actividad cerebral exclusivamente, sin necesidad de realizar movimientos musculares.
Hay varios métodos para detectar esta actividad cerebral, siendo los más utilizados son
los łqno invasivosrq, es decir, los que se basan en el contacto superficial de electrodos en
el cuero cabelludo. El procesado de las señales generadas como consecuencia de
pensamientos voluntarios, como en los sistemas BCI basados en łqritmos sensomotoresrq, sugiere que cuando una zona del cerebro ligada a una tarea de movimiento se activa
para ejecutar el movimiento, las señales registradas cambian sus características. La
propiedad más significativa de estas señales es su comportamiento cuando una persona
imagina el movimiento sin llegar a ejecutarlo, pues se provoca un efecto similar.
Los investigadores en este área trabajan para desarrollar diferentes aplicaciones
que permitan mejorar la calidad de vida de pacientes con severas discapacidades, para
quienes un sistema BCI puede representar un canal viable para interactuar con su
entorno. Esta Tesis centrará la atención en las aplicaciones orientadas a la movilidad
con una silla de ruedas motorizada. Antes de que alguien pueda usar una silla de ruedas
en una situación real, es necesario garantizar que se tiene el control suficiente para
evitar situaciones de riesgo. La realidad virtual es una herramienta adecuada para
proporcionar a los sujetos la posibilidad de entrenar y probar la aplicación en un entorno
seguro, es por ello que en esta Tesis la mayoría de los experimentos se llevó a cabo en
entornos virtuales.
Para permitir el control de una silla de ruedas virtual, varios paradigmas han sido
propuestos, con diferentes interfaces de control y número de comandos de navegación.
Un mayor número de comandos facilita el control de la silla de ruedas; sin embargo, se
ha demostrado que la mejor precisión en la clasificación se consigue cuando sólo dos
tareas mentales son discriminadas. En el tipo de aplicaciones que se están refiriendo,
cuyo objetivo es el control de una silla de ruedas, un error en la clasificación de una
tarea mental (lo que puede llevar a un comando erróneo), puede provocar situaciones
peligrosas; por tanto, es crucial garantizar que se minimiza la tasa de error de modo que
se provea de la máxima seguridad posible al usuario. Por ello, en esta Tesis se desarrolla
un paradigma de control que permite el control de la navegación usando tres o cuatro
comandos, basándose el sistema en la clasificación de únicamente dos tareas mentales.
Entre los sistemas BCI orientados a navegación, muchos tienen la limitación de
ser łqsíncronosrq, es decir, la temporización del control viene regulada por el propio
sistema, de modo que el sujeto sólo puede interactuar con el entorno en ciertos
momentos indicados por dicho sistema. La tendencia actual en la investigación es dejar
a los sujetos que controlen esa temporización, ya que supone un modo más natural de
interacción. Estos sistemas son llamados łqasíncronosrq.
El objetivo de esta Tesis es estudiar diferentes paradigmas de control de un
sistema BCI asíncrono orientado a la navegación (en entornos virtuales y reales) que
puedan ser usados para controlar finalmente una silla de ruedas. Se busca que el control
del sujeto sea en cualquier dirección posible, con tal de conseguir una navegación libre,
al tiempo que sólo se utilice una tarea de imaginación de movimiento (discriminada
frente al estado de reposo) para ejercer dicho control, garantizando de este modo un
menor error en la clasificación.},
keywords = {},
pubstate = {published},
tppubtype = {phdthesis}
}
Una Interfaz Cerebro-Computadora o BCI (Brain-Computer Interface) es un
sistema que permite que las personas controlen un elemento externo por medio de su
actividad cerebral exclusivamente, sin necesidad de realizar movimientos musculares.
Hay varios métodos para detectar esta actividad cerebral, siendo los más utilizados son
los łqno invasivosrq, es decir, los que se basan en el contacto superficial de electrodos en
el cuero cabelludo. El procesado de las señales generadas como consecuencia de
pensamientos voluntarios, como en los sistemas BCI basados en łqritmos sensomotoresrq, sugiere que cuando una zona del cerebro ligada a una tarea de movimiento se activa
para ejecutar el movimiento, las señales registradas cambian sus características. La
propiedad más significativa de estas señales es su comportamiento cuando una persona
imagina el movimiento sin llegar a ejecutarlo, pues se provoca un efecto similar.
Los investigadores en este área trabajan para desarrollar diferentes aplicaciones
que permitan mejorar la calidad de vida de pacientes con severas discapacidades, para
quienes un sistema BCI puede representar un canal viable para interactuar con su
entorno. Esta Tesis centrará la atención en las aplicaciones orientadas a la movilidad
con una silla de ruedas motorizada. Antes de que alguien pueda usar una silla de ruedas
en una situación real, es necesario garantizar que se tiene el control suficiente para
evitar situaciones de riesgo. La realidad virtual es una herramienta adecuada para
proporcionar a los sujetos la posibilidad de entrenar y probar la aplicación en un entorno
seguro, es por ello que en esta Tesis la mayoría de los experimentos se llevó a cabo en
entornos virtuales.
Para permitir el control de una silla de ruedas virtual, varios paradigmas han sido
propuestos, con diferentes interfaces de control y número de comandos de navegación.
Un mayor número de comandos facilita el control de la silla de ruedas; sin embargo, se
ha demostrado que la mejor precisión en la clasificación se consigue cuando sólo dos
tareas mentales son discriminadas. En el tipo de aplicaciones que se están refiriendo,
cuyo objetivo es el control de una silla de ruedas, un error en la clasificación de una
tarea mental (lo que puede llevar a un comando erróneo), puede provocar situaciones
peligrosas; por tanto, es crucial garantizar que se minimiza la tasa de error de modo que
se provea de la máxima seguridad posible al usuario. Por ello, en esta Tesis se desarrolla
un paradigma de control que permite el control de la navegación usando tres o cuatro
comandos, basándose el sistema en la clasificación de únicamente dos tareas mentales.
Entre los sistemas BCI orientados a navegación, muchos tienen la limitación de
ser łqsíncronosrq, es decir, la temporización del control viene regulada por el propio
sistema, de modo que el sujeto sólo puede interactuar con el entorno en ciertos
momentos indicados por dicho sistema. La tendencia actual en la investigación es dejar
a los sujetos que controlen esa temporización, ya que supone un modo más natural de
interacción. Estos sistemas son llamados łqasíncronosrq.
El objetivo de esta Tesis es estudiar diferentes paradigmas de control de un
sistema BCI asíncrono orientado a la navegación (en entornos virtuales y reales) que
puedan ser usados para controlar finalmente una silla de ruedas. Se busca que el control
del sujeto sea en cualquier dirección posible, con tal de conseguir una navegación libre,
al tiempo que sólo se utilice una tarea de imaginación de movimiento (discriminada
frente al estado de reposo) para ejercer dicho control, garantizando de este modo un
menor error en la clasificación.
sistema que permite que las personas controlen un elemento externo por medio de su
actividad cerebral exclusivamente, sin necesidad de realizar movimientos musculares.
Hay varios métodos para detectar esta actividad cerebral, siendo los más utilizados son
los łqno invasivosrq, es decir, los que se basan en el contacto superficial de electrodos en
el cuero cabelludo. El procesado de las señales generadas como consecuencia de
pensamientos voluntarios, como en los sistemas BCI basados en łqritmos sensomotoresrq, sugiere que cuando una zona del cerebro ligada a una tarea de movimiento se activa
para ejecutar el movimiento, las señales registradas cambian sus características. La
propiedad más significativa de estas señales es su comportamiento cuando una persona
imagina el movimiento sin llegar a ejecutarlo, pues se provoca un efecto similar.
Los investigadores en este área trabajan para desarrollar diferentes aplicaciones
que permitan mejorar la calidad de vida de pacientes con severas discapacidades, para
quienes un sistema BCI puede representar un canal viable para interactuar con su
entorno. Esta Tesis centrará la atención en las aplicaciones orientadas a la movilidad
con una silla de ruedas motorizada. Antes de que alguien pueda usar una silla de ruedas
en una situación real, es necesario garantizar que se tiene el control suficiente para
evitar situaciones de riesgo. La realidad virtual es una herramienta adecuada para
proporcionar a los sujetos la posibilidad de entrenar y probar la aplicación en un entorno
seguro, es por ello que en esta Tesis la mayoría de los experimentos se llevó a cabo en
entornos virtuales.
Para permitir el control de una silla de ruedas virtual, varios paradigmas han sido
propuestos, con diferentes interfaces de control y número de comandos de navegación.
Un mayor número de comandos facilita el control de la silla de ruedas; sin embargo, se
ha demostrado que la mejor precisión en la clasificación se consigue cuando sólo dos
tareas mentales son discriminadas. En el tipo de aplicaciones que se están refiriendo,
cuyo objetivo es el control de una silla de ruedas, un error en la clasificación de una
tarea mental (lo que puede llevar a un comando erróneo), puede provocar situaciones
peligrosas; por tanto, es crucial garantizar que se minimiza la tasa de error de modo que
se provea de la máxima seguridad posible al usuario. Por ello, en esta Tesis se desarrolla
un paradigma de control que permite el control de la navegación usando tres o cuatro
comandos, basándose el sistema en la clasificación de únicamente dos tareas mentales.
Entre los sistemas BCI orientados a navegación, muchos tienen la limitación de
ser łqsíncronosrq, es decir, la temporización del control viene regulada por el propio
sistema, de modo que el sujeto sólo puede interactuar con el entorno en ciertos
momentos indicados por dicho sistema. La tendencia actual en la investigación es dejar
a los sujetos que controlen esa temporización, ya que supone un modo más natural de
interacción. Estos sistemas son llamados łqasíncronosrq.
El objetivo de esta Tesis es estudiar diferentes paradigmas de control de un
sistema BCI asíncrono orientado a la navegación (en entornos virtuales y reales) que
puedan ser usados para controlar finalmente una silla de ruedas. Se busca que el control
del sujeto sea en cualquier dirección posible, con tal de conseguir una navegación libre,
al tiempo que sólo se utilice una tarea de imaginación de movimiento (discriminada
frente al estado de reposo) para ejercer dicho control, garantizando de este modo un
menor error en la clasificación.
Rubia-Cuestas, Ernesto J.; Díaz-Estrella, Antonio
Tool generator for an interaction lab Proceedings
no. Actas del, 2012.
@proceedings{del/Gen/2012,
title = {Tool generator for an interaction lab},
author = {Ernesto J. Rubia-Cuestas and Antonio Díaz-Estrella},
url = {http://dl.acm.org/citation.cfm?id=2379659},
year = {2012},
date = {2012-01-01},
number = {Actas del},
pages = {285–289},
abstract = {En este artículo se presenta una solución que permite crear herramientas y prototipos para investigación en interacción y realidad virtual reduciendo el tiempo de desarrollo frente al diseño específico de aplicaciones. El sistema facilita la creación de entornos virtuales realistas y la interacción a través de periféricos de realidad virtual. Se compone de un diseñador que consigue modelar rápidamente aspectos generales (entorno, animación, navegación, etc.) y un kit de desarrollo software (SDK) que permite implementar comportamientos específicos. Se ofrecen ejemplos de aplicaciones que avalan la utilidad de este generador de herramientas.},
keywords = {},
pubstate = {published},
tppubtype = {proceedings}
}
En este artículo se presenta una solución que permite crear herramientas y prototipos para investigación en interacción y realidad virtual reduciendo el tiempo de desarrollo frente al diseño específico de aplicaciones. El sistema facilita la creación de entornos virtuales realistas y la interacción a través de periféricos de realidad virtual. Se compone de un diseñador que consigue modelar rápidamente aspectos generales (entorno, animación, navegación, etc.) y un kit de desarrollo software (SDK) que permite implementar comportamientos específicos. Se ofrecen ejemplos de aplicaciones que avalan la utilidad de este generador de herramientas.
Quintana, Alfonso Ariza; Triviño-Cabrera, Alicia
Chapter 7: Simulation of Multihop Wireless Networks in OMNeT++ in Simulation in Computer Network Design and Modeling: Use and Analysis Book Chapter
In: Al-Bahadili, Hussein (Ed.): Chapter 7, pp. 140–157, Information Science Reference (an imprint of IGI Global), Hershey, 2012, ISBN: 9781466601918.
@inbook{Sim/2012,
title = {Chapter 7: Simulation of Multihop Wireless Networks in OMNeT++ in Simulation in Computer Network Design and Modeling: Use and Analysis},
author = {Alfonso Ariza Quintana and Alicia Triviño-Cabrera},
editor = {Hussein Al-Bahadili},
isbn = {9781466601918},
year = {2012},
date = {2012-01-01},
pages = {140–157},
publisher = {Information Science Reference (an imprint of IGI Global)},
address = {Hershey},
chapter = {7},
abstract = {In this chapter, the authors present a brief description of the OMNeT++ network simulator with the main emphasis on the InetManet framework. This framework is especially oriented to the simulation of MANET and wireless mesh networks. It offers all the basic models and tools necessary to begin the simulation of this type of network. Since the source code is offered, the researcher can modify and include their models and they can simulate their own protocols. The InetManet is specifically oriented to the simulation of MANET over IPv4 networks.
The flexibility of the code and the oriented based model of OMNeT++(and its frameworks) allow reusing the wireless model with other types of networks.},
keywords = {},
pubstate = {published},
tppubtype = {inbook}
}
In this chapter, the authors present a brief description of the OMNeT++ network simulator with the main emphasis on the InetManet framework. This framework is especially oriented to the simulation of MANET and wireless mesh networks. It offers all the basic models and tools necessary to begin the simulation of this type of network. Since the source code is offered, the researcher can modify and include their models and they can simulate their own protocols. The InetManet is specifically oriented to the simulation of MANET over IPv4 networks.
The flexibility of the code and the oriented based model of OMNeT++(and its frameworks) allow reusing the wireless model with other types of networks.
The flexibility of the code and the oriented based model of OMNeT++(and its frameworks) allow reusing the wireless model with other types of networks.
Rubia-Cuestas, Ernesto J.; Díaz-Estrella, Antonio
A forward step in virtual reality Conference
Proceedings of IADIS CGVCVIP 2012 Conference (Lisbon, Portugal, July 2012), 2012.
@conference{ernestodelarubia,
title = {A forward step in virtual reality},
author = {Ernesto J. Rubia-Cuestas and Antonio Díaz-Estrella},
year = {2012},
date = {2012-01-01},
booktitle = {Proceedings of IADIS CGVCVIP 2012 Conference (Lisbon, Portugal, July 2012)},
pages = {171–174},
abstract = {Virtual Reality systems have not achieved their expected success yet. We can find technological limitations in devices and some human factors issues such as ergonomics aspects, among the major reasons to explain this fact. We think a change in this tendency can be expected in a near future thanks to the quick development of technology. That is why in this paper we present our current work in progress in which we recover some key findings from the state of the art to design and build an improved virtual reality system. To start, we focus on real walking systems. To be specific, we have developed and validated real walking prototypes with novel features such as the use of wireless devices (inertial sensors and head mounted display) and removing movement constraints due to absolute references like those in optical and magnetic tracking systems.},
keywords = {},
pubstate = {published},
tppubtype = {conference}
}
Virtual Reality systems have not achieved their expected success yet. We can find technological limitations in devices and some human factors issues such as ergonomics aspects, among the major reasons to explain this fact. We think a change in this tendency can be expected in a near future thanks to the quick development of technology. That is why in this paper we present our current work in progress in which we recover some key findings from the state of the art to design and build an improved virtual reality system. To start, we focus on real walking systems. To be specific, we have developed and validated real walking prototypes with novel features such as the use of wireless devices (inertial sensors and head mounted display) and removing movement constraints due to absolute references like those in optical and magnetic tracking systems.
García, J. F. Villanueva; Díaz-Estrella, Antonio
A multidesk gestural interface for collaborative management in emergency Conference
Proceedings of IADIS CGVCVIP 2012 Conference (Lisbon, Portugal, July 2012), 2012.
@conference{jfvillanueva,
title = {A multidesk gestural interface for collaborative management in emergency},
author = {J. F. Villanueva García and Antonio Díaz-Estrella},
year = {2012},
date = {2012-01-01},
booktitle = {Proceedings of IADIS CGVCVIP 2012 Conference (Lisbon, Portugal, July 2012)},
pages = {179–181},
abstract = {In this paper a new system for collaborative and non-presence management is introduced. This system incorporates a tabletop tangible user interface, a big stereo screen and a Kinect device to capture user 3D gestures. This could be a scalable system just adding more displays to get a bigger MultiTouch table and more Kinect devices to increase the interaction area, but it has been built only with a Kinect device and a multitouch screen for the time being. Users can manage all situations in which a virtual presence or a lot of processing information is needed, such as surveillance, virtual trips or collaborative management for disaster or emergency situations.},
keywords = {},
pubstate = {published},
tppubtype = {conference}
}
In this paper a new system for collaborative and non-presence management is introduced. This system incorporates a tabletop tangible user interface, a big stereo screen and a Kinect device to capture user 3D gestures. This could be a scalable system just adding more displays to get a bigger MultiTouch table and more Kinect devices to increase the interaction area, but it has been built only with a Kinect device and a multitouch screen for the time being. Users can manage all situations in which a virtual presence or a lot of processing information is needed, such as surveillance, virtual trips or collaborative management for disaster or emergency situations.
García-Berdonés, Carmen; Martín, Juan Pedro Peña; Molina-Tanco, Luis; Toledo, María Cavas; García, Francisco Chicano; valero, Francisco Luna
Aprendizaje basado en Proyectos para desarrollo de la competencia emprendedora en un máster de electrónica Conference
Actas de las III Jornadas sobre Innovación Docente y Adaptación al EEES en las Titulaciones Técnicas (INDOTEC), Universidad de Granada Godel Impresiones Digitales, 2012, ISBN: 9788415418733.
@conference{Car/Apr/2012,
title = {Aprendizaje basado en Proyectos para desarrollo de la competencia emprendedora en un máster de electrónica},
author = {Carmen García-Berdonés and Juan Pedro Peña Martín and Luis Molina-Tanco and María Cavas Toledo and Francisco Chicano García and Francisco Luna valero},
isbn = {9788415418733},
year = {2012},
date = {2012-01-01},
booktitle = {Actas de las III Jornadas sobre Innovación Docente y Adaptación al EEES en las Titulaciones Técnicas (INDOTEC)},
pages = {319–324},
publisher = {Godel Impresiones Digitales},
organization = {Universidad de Granada},
abstract = {En este trabajo se incorpora la competencia emprendedora a un máster de carácter profesional utilizando ``aprendizaje basado en
proyectos''. Así, se refuerzan las competencias de auto aprendizaje y de trabajo en grupo utilizando técnicas de trabajo cooperativo. La
evaluación muestra un altísimo nivel de aceptación por los alumnos y un porcentaje de egresados emprendedores pequeño, pero
relevante.},
keywords = {},
pubstate = {published},
tppubtype = {conference}
}
En este trabajo se incorpora la competencia emprendedora a un máster de carácter profesional utilizando “aprendizaje basado en
proyectos”. Así, se refuerzan las competencias de auto aprendizaje y de trabajo en grupo utilizando técnicas de trabajo cooperativo. La
evaluación muestra un altísimo nivel de aceptación por los alumnos y un porcentaje de egresados emprendedores pequeño, pero
relevante.
proyectos”. Así, se refuerzan las competencias de auto aprendizaje y de trabajo en grupo utilizando técnicas de trabajo cooperativo. La
evaluación muestra un altísimo nivel de aceptación por los alumnos y un porcentaje de egresados emprendedores pequeño, pero
relevante.
2011
Viciana-Abad, Raquel; Reyes-Lecuona, Arcadio; Poyade, Matthieu; Carrasco, José Escolano
The role of mismatches in the sensory feedback provided to indicate selection within a virtual environment Journal Article
In: Multimedia Tools Appl., vol. 55, no. 3, pp. 353–378, 2011, ISSN: 1380-7501.
@article{Viciana-Abad:2011:RMS:2036512.2036537,
title = {The role of mismatches in the sensory feedback provided to indicate selection within a virtual environment},
author = {Raquel Viciana-Abad and Arcadio Reyes-Lecuona and Matthieu Poyade and José Escolano Carrasco},
url = {http://dx.doi.org/10.1007/s11042-010-0551-x},
doi = {10.1007/s11042-010-0551-x},
issn = {1380-7501},
year = {2011},
date = {2011-12-01},
journal = {Multimedia Tools Appl.},
volume = {55},
number = {3},
pages = {353–378},
publisher = {Kluwer Academic Publishers},
address = {Hingham, MA, USA},
keywords = {},
pubstate = {published},
tppubtype = {article}
}
Velasco-Álvarez, Francisco; Ron-Angevín, Ricardo; da-Silva-Sauer, Leandro; Sancha-Ros, Salvador
Proceeding of the Fifth International Conference on Broadband and Biomedical Communications (IB2Com 2010), Málaga, Spain, 2011, ISBN: 9781424469512.
@conference{5723617,
title = {Brain-Computer Interface: Comparison of two paradigms to freely navigate in a virtual environment through one mental task},
author = {Francisco Velasco-Álvarez and Ricardo Ron-Angevín and Leandro da-Silva-Sauer and Salvador Sancha-Ros},
doi = {10.1109/IB2COM.2010.5723617},
isbn = {9781424469512},
year = {2011},
date = {2011-12-01},
booktitle = {Proceeding of the Fifth International Conference on Broadband and Biomedical Communications (IB2Com 2010)},
pages = {1–5},
address = {Málaga, Spain},
abstract = {A Brain-Computer Interface (BCI) is a system that enables communication and control that is not based on muscular movements, but on brain activity. Some of these systems are based on discrimination of different mental tasks; usually they match the number of mental tasks to the number of control commands. In this paper, we will present a BCI system focused on the control of a virtual wheelchair. Our aim is to test different navigation paradigms to train subjects in a safe environment, prior to using it under real conditions. Due to the danger associated to a misclassification of the user's intention in a navigation system, the BCI system was developed using the optimum number of mental states regarding the classification accuracy, that is, only two. However, the system let the subjects choose among several navigation commands using only one active mental task (versus any other mental activity). Mapping one task into a higher number of commands was carried out with two different paradigms: i) the first one let the subjects move in a continuous way while they kept this task active, and ii) the subjects used the mental task to switch their state on /off: they stopped if they were moving (advances and turns) and vice versa. Sixteen healthy and untrained subjects, divided into two groups, participated in an experiment in which each group used one of the paradigms. Preliminary results show that both paradigms can be used to navigate through virtual environments, although with the first one the times needed to complete a path were notably lower.},
keywords = {},
pubstate = {published},
tppubtype = {conference}
}
A Brain-Computer Interface (BCI) is a system that enables communication and control that is not based on muscular movements, but on brain activity. Some of these systems are based on discrimination of different mental tasks; usually they match the number of mental tasks to the number of control commands. In this paper, we will present a BCI system focused on the control of a virtual wheelchair. Our aim is to test different navigation paradigms to train subjects in a safe environment, prior to using it under real conditions. Due to the danger associated to a misclassification of the user’s intention in a navigation system, the BCI system was developed using the optimum number of mental states regarding the classification accuracy, that is, only two. However, the system let the subjects choose among several navigation commands using only one active mental task (versus any other mental activity). Mapping one task into a higher number of commands was carried out with two different paradigms: i) the first one let the subjects move in a continuous way while they kept this task active, and ii) the subjects used the mental task to switch their state on /off: they stopped if they were moving (advances and turns) and vice versa. Sixteen healthy and untrained subjects, divided into two groups, participated in an experiment in which each group used one of the paradigms. Preliminary results show that both paradigms can be used to navigate through virtual environments, although with the first one the times needed to complete a path were notably lower.